U.S.-based ceramic materials development

Ceramic injection
molding feedstocks

Work directly with a ceramic engineer to develop a complete powder–binder feedstock around your material, tooling, and downstream process.

From feedstock to debound partMagnesium aluminate spinel · Published research example
Side-by-side photographs of gray feedstock granules, a molded green part, and a debound brown part
  • Feedstock granules
  • Molded green part
  • Debound brown part
Image credit and scale

The CIM process

  1. CompoundDisperse ceramic powder in a binder.
  2. MoldFill the tool and form the green part.
  3. DebindRemove the binder while retaining shape.
  4. SinterDensify the ceramic and account for shrinkage.

Feedstock development

What do you need the material to do?

Browse feedstock categories

Fill the mold consistently

Investigate short shots, flow instability, or powder–binder separation alongside the injection conditions and part geometry.

Hold shape through debinding

Consider green-part handling, section thickness, the binder-removal route, and where cracks or warpage begin.

Meet finished-part requirements

Define dimensional and defect limits alongside the sintering conditions, then decide what an evaluation should measure.

Technical expertise

Work directly with a ceramic engineer

Our technical lead brings more than 10 years of ceramics experience. Development starts with your powder, equipment, and process constraints, then moves to a test plan suited to the application.

Technical RFQ

Tell us what you need to make

Share the material you need, what you want to change, and the quantities you expect. For unusual applications, start with the process and the problem.

Start a Technical RFQ