Technical resources

Ceramic feedstock FAQ

General CIM principles and what to include when proposing a formulation evaluation.

What is ceramic injection molding feedstock?

It is a compounded mixture of ceramic powder and an organic binder system. The binder allows the powder to flow into the mold and holds the shape after molding. The binder is then removed and the ceramic is sintered. CIM is a branch of powder injection molding (PIM).

How is feedstock different from the binder?

The binder is the organic portion. In some systems a backbone polymer helps retain shape, while other components, such as waxes, plasticizers, or dispersants, help with flow, wetting, or removal. The feedstock includes both the binder and ceramic powder.

How do I determine suitability for my process?

Compare the powder specifications, melt behavior, and molding window against the machine and tooling. Then evaluate green parts, debinding, and sintering with representative geometry. Confirm the pressure regime and binder-removal route for the actual formulation.

How does solids loading affect processing?

Solids loading is the fraction of ceramic powder in the compound. State whether it is percent by volume (vol%) or mass (wt%). Higher loading can reduce the binder fraction and influence shrinkage, but can also raise viscosity. The practical loading depends on powder packing, binder, and the process window.

Why do viscosity and rheology matter?

Feedstock viscosity affects how it flows through gates and fills the cavity. Many feedstocks are shear thinning, so their apparent viscosity drops as shear rate rises under comparable conditions. Compare data using the same material basis, temperature, shear rate, and test method.

What are green and brown parts?

A green part is the molded, unsintered body with its binder still present. A brown part is the debound body before sintering. It is generally more fragile and may require support during handling.

What is debinding?

Debinding removes the organic binder. The binder chemistry determines which thermal, solvent, or catalytic routes are suitable, and some systems require multiple steps. Section thickness and removal conditions affect risks such as cracking, distortion, and residual organics.

Why do shrinkage and sintering conditions matter?

The ceramic densifies during sintering and typically shrinks. Powder chemistry, green density, and the firing conditions affect final dimensions. Measure linear shrinkage under representative conditions and in relevant directions before applying tooling compensation.

Can a formulation be tailored to a particular powder?

That is the focus of custom development. Feasibility depends on the powder, binder interactions, equipment, and qualification requirements. Start by identifying the composition, particle size distribution, and any process or ingredient restrictions.

What belongs in a custom feedstock request?

Describe the part and manufacturing problem. Include the ceramic grade, molding equipment, desired processing window, debinding route, sintering requirements, expected quantities, and the decision you need the evaluation to support. Share only non-confidential information initially.

Can I request a sample or evaluation compound?

Yes. Share the quantity, intended tests, and decision timeline. Sample availability, documentation, and feasibility are confirmed during technical review.

Can I discuss an application outside CIM?

Yes. Use the RFQ to describe the forming or processing method and the function the material must perform. The scope and feasibility are assessed case by case.